There are a few simple steps we recommend regularly taking to keep your SM2 recorder running smoothly.

Update your recorder's firmware.

Instructions can be found on our downloads page.

Ensure that the black hex nuts on the outside of the recorder are hand-tight.

Using a wrench for this risks damaging these parts. The nuts should be tight enough to be flush against the outside surface of the recorder and to hold the rubber gaskets on the inside of the recorder tight against the inner wall. This will ensure a water-proof seal.

Replace the AA batteries that power the SM2's clock annually.

To do so, gently insert a credit card in between the Velcro fasteners on the right side of the AA battery harness to loosen the hold. You can also use a screwdriver to gently lever the harness out of the recorder. Do not try to force the AA battery harness away from the Velcro, as this could tear away the wires connecting the battery harness to the rest of the electronics.

• What is the lowest frequency the Song Meter Mini Bat's ultrasonic microphone can record?
• What is the lowest frequency the Song Meter SM4BAT FS can record?
• Why can't I use an adapter to connect a USB-C Echo Meter Touch to my Lightning iOS device?
• What adapter do I need for my Echo Meter Touch module and Android or iOS device?
• Can I use Echo Meter Touch modules with USB connectors with iOS devices?
• What type of plug does my Echo Meter Touch module have?
• What iOS devices are compatible with my Echo Meter Touch module?
• What type of data port does my phone or tablet have?
• How do I update the firmware on my Echo Meter Touch module with USB to add iOS compatibility?
• Are there acoustic differences between the first- and second-generation Mini Bat recorders?
• Will the Lithium-ion lids I used with first-generation Minis fit the new models?
• Will the security bracket accessory I use with first-generation Minis be compatible with the new models?
• View more questions